High-impact paint coatings

High-impact paint coatings offered by our company are one-component polyurethane compounds containing a solvent (cured by air moisture). These coatings are made of polyurethane prepolymer with target additives.

The product is suitable for developing a wear and chemical resistant coating, effective as a finish layer in the arrangement of industrial coatings (with different operating modes and loads).

Scope of Application

The compound can be used on concrete and cement, wooden surfaces, for anticorrosive protection of steel, concrete and reinforced concrete building structures in mild and cold climate operating conditions.

High-impact paint coatings are used at such facilities:

• Storage facilities.
• Food industry facilities.
• Production workshops.
• Common facilities.
• Parking lots.
• Sea vessels and yachts.

Before starting work, you need to prepare the base. It must be firm, with sufficient load-bearing capacity, without peeling elements. Dust, oils, fats, traces of rubber and other substances that may interfere with adhesion must be removed from the base before applying the compound. The index of the concrete base for peel strength should be about 1.5 N / mm2, while the compressive strength should be about 20 N/ mm2.

Advantages

High-impact paint coatings from the trademark “Gekkon” are quite popular among professional builders due to their undeniable advantages:

• Economical consumption.
• Resistance to moisture and sea water.
• The possibility of making slip resistant coatings.
• Easy application.
• The possibility of making an abrasive-resistant (non-scratching) coating.
• Environmental and hygienic safety during operation.
• High physical and mechanical characteristics.
• The possibility of decorating with colored flocks.
• The possibility of creating a multi-color coating.

Conclusion

You can place an order for high-impact paint coatings from the manufacturer Glass System LLC in our company. Any compound has certificates, fully complies with established standards and norms, has an optimal cost-quality ratio.

If you need help with the choice according to your specific task, contact our experienced managers by the contact phone numbers on the website. Specialists will help you to choose the material taking into account the characteristics and appearance of the coating being created.